«  
  »

Evolis Pebble 4 Printer – Cleaning the Printhead

Following is a video demonstrating how to clean the printhead on an Evolis Pebble printer.

To clean the printhead, follow the directions displayed in the above video.

    1. Remove the power plug
    2. Open the top cover
    3. Break the vial in the printhead cleaner and allow the fluid to run to the swab
    4. Run the swab across the printhead.
    5. Close the top cover
    6. Reinstall the power plug
    7. Check for power.

Safe-Card ID carries the Evolis Tattoo, Evolis Pebble, Evolis, Dualys, Evolis Quantum and Evolis Securion printers.

Related posts:

  1. Evolis ID Card Printer – How to Clean the printhead
  2. Evolis Pebble 4 – Turning the Power On the Printer
  3. Evolis Pebble 4 – Printing a Test Card
  4. Evolis Printers – How to Clean the Evolis Printer
  5. Evolis Printer – See how a card printer prints an id card
January 5th, 2009 | Tags: , , , , | Category: Evolis Printer, Video

Leave a Reply

  

  

  

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>