Evolis Pebble 4 – Printing a Test Card

Following is a video from www.safecardid.com that illustrates how to print a test card using an Evolis Pebble 4 ID card printer.

 

Directions to Print a Test Card

1. Check to make sure that there is a print ribbon and pvc cards in the printer.

2. Power the printer off.

3. Push the printer power button and turn the power back on. Without releasing pressure, continue holding the power button until the light flashes.

4. As you hold the power button in, the printer will pull a PVC card through the printer and print a test card.

5. Keep the test card in a safe place as it will contain specifications about your printer that may be needed for future parts or repair.

Safe-Card ID carries the Evolis Tattoo, Evolis Pebble, Evolis, Dualys, Evolis Quantum and Evolis Securion printers.

Leave a Reply

Your email address will not be published. Required fields are marked *

one + nine =