Fargo 500 Series Print Quality


Following is a question received from our technical support response team:


We have a Fargo Printer. Generally the print quality on the card is good and there are no lines or streaks like that indicating print head damage. We do get what I can only call a smudge on the first 1/2 inch of the card. Any ideas?


You might go to the print driver settings to change the way the printer prints the card. This can be found in the printing preferences. Go to the device options tab and choose “rotate front 180 degrees”. Then print a card. This may fix the problem.

If not, try downloading the latest print driver from Fargo.

If the problem persists, contact your solutions provider for technical assistance or the Fargo Technical Support line at 800-459-5636 for specific repair information.

For additional information about the current Fargo printer models, let our id card experts provide you with a free consultation.

Leave a Reply

Your email address will not be published. Required fields are marked *

one × five =