Tag Archives: manual card feeder

Evolis Pebble Printer – How to Use the Manual Feeding Mode

If you have an Evolis Pebble and wish to use the manual feeding mode, you will find the steps to attaching the feeder in the following Evolis video.

1. Remove the printer feeder.

2. Use the gauge and adjust it to the “Max” position.

3. Insert the manual feeding tray. Then press on the top of the feeder until the feeder clicks audibly into its slot. Select the “manual feeder” from the “feeding source is” menu and choose the desired outcome mode.

4. Insert the cards in the printer.

If you are interested in information about the Evolis Pebble printer or other Evolis printers available, contact our ID card experts at 888-485-4696.

Evolis Dualys 3 – Installing a Manual Card Feeder

Safe-Card ID presents a video illustrating how to install a manual card feeder on the Evolis Dualys 3 ID card printer.

How to install a manual card feeder in your Evolis Dualys.

1. Remove the card hopper.
2. Adjusts the card thickness gauge to 40 ml.
3. Insert the manual card feeder.
4. Go to the print driver.
5. Adjust the source tray and output tray to manual hopper.
6. Apply.
7. Insert the card.
8. Print the card.

For further assistance, contact one of our technicians at 704-535-5200; we look forward to hearing from you!