Zebra P120i – Loading Print Ribbons in the Printer

 

To load print ribbon cartridges into the Zebra P120i printer:

1. Open the lid by pressing on the silver release button on top of the printer and lift the lid.
2. Remove the protective wrapper from the ribbon cartridge.
3. Remove the cardboard sleeve and peel off the blue tape on the cartridge.
4. The smart chip on the cartridge will match the contacts inside the printer.
5. Hold the cartridge parallel to the printer and slide the ribbon cartridge into the grooves.
6. Open the card hopper located in the front of the printer.
7. Press the lid closed until your hear it click.

Find out specific information about Zebra Printer models:

Zebra P110i
Zebra P330i
Zebra P430i
Zebra P520i

One thought on “Zebra P120i – Loading Print Ribbons in the Printer

  1. Pingback: Zebra P120i – Loading Print Ribbons in the Printer | Betty´s Design

Comments are closed.