Tag Archives: Tattoo2

Evolis Tattoo 2 – How to Clean the Interior of the Printer

Following is an illustrated process to clean the interior of an Evolis Tattoo 2 ID card printer. This Evolis produced video will provide you with the steps needed to keep your printer running in peak condition.

1. Switch the printer power on and open the cover.

2. Remove the ribbon and close the cover.

3. Press on both sides of the feeder and detach it from the printer by lifitng it up and out.

4. Remove any cards located in the feeder.

5. Use a new cleaning card provided in your Evolis cleaning kit and place it in the feeder.

6. Press the control panel’s push button for one second.

7. The cleaning process will start.

8. As the card passes multiple times inside, it cleans the cards transport rollers, the cleaning rollers and the printhead as well.

9. The used card is then ejected into the output hopper.

10. Place the ribbon back into place and the cards back into the feeder.

If you are interested in information about the Evolis Tattoo 2 printer or other Evolis printers available, contact our ID card experts at 888-485-4696.

Visit the manufacturer website here.

Evolis Tattoo 2 – How to Use the Output Hopper

The Evolis Tattoo 2 printer is shipped with a detachable card hopper that will receive printed cards. Evolis has provided a video displaying how the output hopper is attached to the printer for use.

The hopper will accept 15 standard 30 ml PVC cards. It is attached by carefully lifting the front of the printer and placing the output hopper in place as shown in the video.

If you are interested in information about the Evolis Tattoo 2 printer or other Evolis printers available, contact our ID card experts at 888-485-4696.

Evolis Tattoo2 – Firmware Update Available

The Evolis Tattoo 2 printer provides a colorful plastic card print. The firmware for this printer has been recently improved to provide significant improvements in the print quality results.

To download the recent firmware, visit the drivers and firmware page on the Evolis website at: http://www.evolis.com/eng/Drivers-Support/Product-support/Tattoo-2/Drivers-and-firmware

If you are interested in information about the Evolis Tattoo 2 printer or other Evolis printers available, contact our ID card experts at 888-485-4696.