Proximity Cards are made with layers of PVC and a glossy surface intended for Photo ID printing. Proximity cards and contactless smart cards contain an antenna coil and integrated electronic chip. Care should be taken to follow these printing recommendations for best results.
As you may encounter color variations or printing voids with direct to card printers due to surface imperfections caused by the embedded chip and antenna you should;
- Avoid large areas with solid or half-tone backgrounds when designing card artwork and use artwork with varied color or pattern to minimize these color variations and printing voids.
- If the design must print over the internal chip, we recommend the use of a reverse transfer printer such as the Fargo HDP5000.
- Do not place a photo portrait over the chip location or opposite the edge of a magnetic stripe.
When designing card artwork it’s best to print a few test cards, and be ready to make artwork adjustments as needed.
If your printer is capable of edge-to-edge printing, test several cards to check the printer’s capability. For more infrmation contact an expert at Safe-Card ID Services.
ID Card and Badge printers come in all shapes and sizes but are limited in ability in terms of the card sizes they can print. Todays’ card printers are made to print on standard CR80 size cards, with a number of them also capable of printing on CR79 and only a very few that can print CR100 size cards.
– CR79 cards measure 3.303″ x 2.051″ and are slightly smaller than a standard CR80 size card. CR79 cards typically have an adhesive back and are commonly used for printing and adhering to a clamshell HID Proximity card.
• CR80 cards are 3.375″ x 2.125″ (exactly the same size as a credit card) and are the standard, most commonly used size of PVC card. They are great for almost every ID card application.
• CR100 cards are much larger measuring 3.88″ x 2.63″ – that’s 42% larger than a standard CR80 card, making them easier to see from a distance but too big to hide in a wallet. CR100 size cards are often referred to as “oversize” or “military-size” cards. These are great for event passes. Printers that can handle these cards such as the Fargo HDP600 are usually manufactured to order and are very expensive.
Before ordering any type/size of PVC cards it is very wise ensure your printers specifictions to ensure it can handle them or call a specialist at Safe-Card ID Services.