When you want to use a 1326 proximity or clam shell card as an access card and identification card, you can purchase a pressure sensitive overlay that can be printed on your ID card printer.
Depending upon the printer manufacture and printer specifications, you will need to purchase a 10 mil or a 24 ml pressure sensitive card or a 10 ml pressure sensitive card with a mylar back.
Directions for applying this card to the access card:
1. Using your direct to card printer, print a single sided photo ID card to the pressure sensitive card.
2. Before removing the backing, adjust your slot punch to align the hole in the pressure senstive card to the hole in the prox card.
3. Peel the backing and apply with printed card to the clamshell card.
The benefit of using the pressure sensitive card on the proximity card is that you can remove the pressure sensitive card and replace it with a new identification card when needed.
If you are using a HDP5000, this option is not available.
For more information about HID prox cards and photo ID card systems, visit our plastic card printer store online.