Tag Archives: Securion

Evolis Printers – How to Clean the Rollers

When cleaning the Evolis printers, it is good to clean the rollers at the same time that a cleaning card is used to clean the inside of the printer.  Following are the steps to cleaning the roller in your Evolis printer.

1.  Open the Evolis printer cover.

2.  Remove the print ribbon.

3.  Remove the cleaning roller from the printer.

4.  Take a new cleaning cloth and eliminate dirt and dust on the roller by rubbing the cloth gently across the surface of the roller.

5.  Place the roller back into the printer when it is dry.

6.  Return the print ribbon back into the ribbon spindles.

7.  Close the cover.

As always, our technicians are available for assistance at 704-535-5200; we look forward to hearing from you!

Evolis Printers – How to Clean the Evolis Printer

Pebble

To keep your Evolis printer running smoothly, it is recommended that the internal parts of the printer be cleaned about every 1,000 prints.   The cleaning light will light on the printer when the recommended cards have run through the printer and cleaning is due. Following are the recommended steps to clean the ID card printers.

1.  Turn the printer on.

2.  Open the printer cover.

3.  Remove the print ribbon.

4.  Close the cover.

5.  Open a new Evolis cleaning card.

6.  Remove PVC cards from the card feeder and insert the cleaning card into the feeder.

7.  Adjust the card thickness to the maximum position.

8.  Place the feeder back into the printer.

9.  Press the green button on the control panel for a few seconds and the cleaning will begin.

10.  The cleaning card will eject.

For more information about Evolis ID card printers, visit our Evolis Tattoo, Evolis Pebble, Evolis Dualys, Evolis Quantum or Evolis Securion product pages. For a free consultation regarding what printer would be the best fit for your application, contact us toll free at 888-485-4696.

Evolis Card Printers – How to Install a Print Ribbon

Pebble

When putting a new ribbon into your Evolis ID card printer, it is important to install the correct ribbon in the right format to make card printing easy.

Make sure that you have the correct ribbon for the card you will be printing. A full color single side print will require a YMCKO print ribbon. A full color dual sided card will need a YMCKOK print ribbon to print both front and back of the card in the single pass. The printer used must also be able to print dual sided cards.

First, gently pull the adhesive tape holding the ribbon off.

Open the printer cover and place the ribbon correctly into the ribbon spindle. Follow the pictured instructions on the printer to determine what spool goes into each spindle.

Close the printer lid. The ribbon will automatically synchronize and be ready to print a card.

For more information about Evolis ID card printers, visit our Evolis Tattoo, Evolis Pebble, Evolis Dualys, Evolis Quantum or Evolis Securion product pages. For a free consultation regarding what printer would be the best fit for your application, contact us toll free at 888-485-4696.